Stellar Phoenix Windows Data Recovery

Are you facing error message while booting your Windows Vista computer? Does your system stop responding upon boot or the system is not longer bootable? If your answer is ‘yes’ for any of these answers, you are at stake of data loss. Such issues render your Windows hard drive inaccessible and cause critical data loss situations. At this point, you need to restore lost data from an updated backup. However, in case if the backup is not available, Windows Data Recovery solutions are required to extract lost data.

If your Windows Vista based-computer is not booting up at all, you can try out following steps to sort out this issue:

Startup Repair- It is a Microsoft Windows recovery tool, which can resolve certain issues like corrupted or missing system files that may prevent Windows Vista from starting. You can access this option from System Recovery Options menu that is on Microsoft Windows Vista installation DVD. If your system has pre-installed Windows Recovery options, it may also be their on your hard drive.

Modify Restart Settings through Safe Mode- Reboot your Microsoft Windows Vista computer in safe mode and then select ‘Disable automatic restart on system failure’ check box. It helps you to resolve the issue if your system is stuck in boot where Windows Vista fails and tries to reboot again and again.

Reinstall Windows Vista- If none of the above methods work and all of the hardware components of your system are intact, reinstall Windows Vista. Re installation replaces all the damaged system files with new one and fix the problem.

You should perform the reinstallation of Windows Vista as a last option, as it needs formatting of the hard drive that eventually removes all the files from your Windows disk. After you reinstall the Windows Vista, you need to install all the programs and restore data from backup.

In case if the backup is damaged, not updated, or does not exist, Windows Data Recovery Software is the only option to go. These applications are incorporated with powerful scanning algorithms to carry put in-depth scan of entire hard drive and extract all lost, missing, and inaccessible data from it.

They enable you to recover windows data on your own, as they have simple and self-descriptive graphical user interface. The applications do not alter original data on your hard drive due to read-only and non-destructive conduct.

Stellar Phoenix Windows Data Recovery software is the most effective and well-known product for assured recovery of lost Windows data. The software works well with Microsoft Windows 7, Vista, 2003, XP, and 2000. It recovers lost data from FAT16, FAT32, VFAT, NTFS, and NTFS5 file system partitions.

Are you facing “corrupted files” error while accessing data from a NTFS (New Technology File System) file system partitions of Windows computer? If yes, this behavior can lead to various critical data loss situations. You valuable files may get rendered inaccessible from your Windows hard drive. At this point, you may need to go for Windows Data Recovery solutions to extract lost data, if there is no backup in place or it is not updated.

In a practical scenario, you may come across any of the below behaviors while accessing data from a NTFS file system partition:

An error message appears stating that the file(s) are damaged and you should run the Chkdsk utility for repairing the issue. After you run the Chkdsk tool, the problem reoccurs.

An application, which is performing write operation to NTFS file system partitions hangs and other applications might hang subsequently when try try to perform the disk operations.

In fact the file(s), which are indicated as damaged, are not damaged. Running the Chkdsk tool can not complete successfully as there is nothing to repair for Chkdsk.

This behavior of NTFS file system renders all of your valuable data inaccessible and cause critical data loss situations. In order to gain access of your valuable data, you are required to find out the cause of this problem and perform Windows Data Recovery by sorting it out.

Cause

This problem is with the way in which NTFS.SYS (driver file of NTFS file system) handles internal file structures if more than one attributes are present.

This issue affects the files, which have ‘extra’ data attributes, which are located in Windows directories with ‘extra’ attributes. Files/directories in SFM (Services for Macintosh) volumes have such type of extra data attributes, thus the problem is more common with these files.

This issue eventually leads to data inaccessibility and data loss situations. At this point, you Windows Data Recovery Software come for your rescue. The applications work in most of the logical data loss situations such as file inaccessibility, file system corruption, hard drive formatting, and more.

Windows Data Recovery tools carry out in-depth scan of entire storage media and extract all lost data from it. They come equipped with simple and self-descriptive graphical user interface and thus do not demand sound technical skills for absolute recovery.

Do you want to have extended security features, support for VIA 64-bit CPUs in Windows Vista? If your answer is yes, you should opt for Windows Vista Service Pack 2. Along with the improved security features, this release includes a number of advanced features. However, in some cases upgrading to Windows Vista SP2 may cause a number of issues, which make your system unbootable and render all hard drive partitions inaccessible. It causes partition loss situations and need Partition Recovery to retrieve lost partitions and data.

In a practical scenario, you may come across below error message after installing Windows Vista Service Pack 2 (SP2), you may encounter below error message constantly:

“Error loop (x64)- Error code 0xc0190036”

In place of rolling back, Windows Vista SP2 updates continue try over and over for modifying the file, which contains error. The file checks as:

“Error 0×00190036 mshtml.tlb”

After the above behavior of Windows Vista, the installer does not run in any mode, i.e. you can not go for Safe Mode to try to recover the system. It again tries to install botched Vista SP2. Rebooting the system also does not help, as updater again activates itself.
This behavior eventually cause partition loss by rendering them inaccessible. You need to identify the cause of this behavior and perform Windows Partition Recovery to gain access of your valuable data.

Root of the problem

The above behavior is caused by missing or damaged mshtml.tlb file or other system files. Due to missing files, Windows can not get proper resources to boot up and work.

Resolution

You can sort out this problem by renaming the damaged dll files by going through the below steps:

• Boot your system from Windows Vista DVD.
• Choose ‘Repair You Computer’ option.
• Click Command prompt.
• Type below commands on Command prompt and press Enter key after every line:

C:
cd windows
cd system32
ren mshtml.tlb mshtml.tlb.old

• Exit the command prompt.
• Reboot your system.

If the above method does not work, you need to format the hard drive and reinstall Windows Vista. This method removes all hard drive partitions and need Partition Recovery Software to work around the problem.

The Windows Partition Recovery applications use high-end scanning techniques to methodically scan entire Windows hard drive and retrieve lost partitions. With read-only behavior and simple user-interface, they are safe and easy to use.

Stellar Phoenix Windows Data Recovery is the most efficient and complete solution for assured recovery of lost Windows partitions. The software is compatible with Microsoft Windows 7, Vista, 2003, XP, and 2000. It recovers FAT16, FAT32, VFAT, NTFS, and NTFS5 file system partitions.

In Microsoft Windows operating system, you can use startup disk for booting your system using a disk, instead of hard drive. You can use startup disk for fixing problems that may develop in your Windows computer. The startup disk can be used in various situations where your system can not boot up or some critical data structures get damaged. It helps you to gain access of your hard drive partitions and prevent need of Partition Recovery solutions.

The startup disk of Windows operating system can access a hard drive, which has the FAT (File Allocation Table) or NTFS (New Technology File System) file system partitions. It can be useful to sort out the below startup issues in Microsoft Windows operating system:

• Damaged MBR (Master Boot Record)
• Corrupted Startup Sector
• Corrupted or Missing Ntdetect.com or NTLDR
• Virus Infection
• Incorrect Ntbootdd.sys Driver

The startup disk can also be used for booting your system from shadow copy of the broken mirror. But, you need to modify the Boot.ini file on Windows hard drive to do this.

However, sometimes the startup disk can not help you to fix the startup problems in Windows system and may give you the below error when trying to fix any problem:

“Windows could not start because of a computer disk hardware configuration problem. Could not read from selected startup disk. Check startup path and disk hardware. Please check the Windows (TM) documentation about hardware disk configuration and your hardware disk configuration and your hardware reference manuals for additional information. Boot Failed.”

Furthermore, you cannot use Windows startup disk for resolving the following issues:

• Damaged or incorrect device drivers, which are installed in Windows System folder.
• Startup issues, which occur after OSLOADER screen.

In order to fix such issues, load last known good configuration or reinstall Windows operating system. Reinstalling the Windows operating system removes all the data from primary partition or entire hard drive and need Windows Partition Recovery to sort out the problem.

You can Recover Partition through the help of Partition Recovery Software in a quick and perfect way. The applications are incorporated with advanced scanning techniques, to ensure absolute recovery of lost, missing, or damaged partitions. These tools are completely safe and easy to use with non-destructive conduct and rich graphical user interface.

Stellar Phoenix Windows Data Recovery is the best ever made application to retrieve lost Windows partitions. The software is compatible with Microsoft Windows 7, Vista, 2003, XP, and 2000. It recovers FAT16, FAT32, VFAT, NTFS, and NTFS5 file system partitions.

Microsoft periodically provides security updates and hotfix to resolve any issue with your Windows operating system. The hotfix is actually a software patch that is applied to still running systems. It is a single, accumulative package, which includes various files that are applied to sort out an issue with Windows. Generally, a hotfix is designed to resolve a particular customer situation.

However, in some cases, hotfix can not address the current problem and your system remains unusable. This behavior may render your critical data inaccessible and lead to data loss situations. In order to extract lost data in such circumstances, windows data recovery solutions are required.

In a practical scenario, when you attempt to apply a security update or hotfix in Windows 2003 Server, you come across the below error message:

“The data is invalid.”

In this case, you cannot completely applying the security update or hotfix and the system remains in actual state.

Root of the issue

This problem generally occurs due to corruption to the catalog (.cat) file of your Windows operating system. When you use the Update.exe utility for applying a security update or hotfix, it verifies digital signatures of all the .cat files. When the tool encounters a damaged .cat file, you come across this problem.

The catalog (.cat) file is an important data structure of Windows operating system. It is applied as digital signatures for an absolute collection of the files. It has a bunch of orthumbprints, Each thumbprint, and cryptographic hashes.

Solution

In order to sort out this behavior, try out following things:

• Make sure that your Internet connection is working properly.
• Verify whether the catalog files are damaged.
• Delete unsigned catalog files from Catroot folder.
• Reboot your system.

In case if this method does not work, you need to either repair or reinstall Windows operating system. Reinstalling the Windows operating system needs formatting of primary hard drive partition, which removes all the stored data and need Windows Recovery to be sorted out.

You can easily Recover Windows Data using third-party Windows Data Recovery Software. The applications are particularly designed to carry out in-depth scan of entire Windows hard drive and extract all lost, missing, and inaccessible data from it. With simple graphical user interface and read-only conduct, the applications are completely easy and safe to use.

Microsoft Windows XP is considered to be a reliable and stable version of Windows operating system. However, it is still possible that it unexpectedly crashes and dies. It can occur due a number of reasons, and is quite possible to avoid. You need to be prepared for the same to save your mission-critical data in such situations. In case if you can not handle the situation and data loss occurs, Windows Recovery is the way to go.

Following are some general steps that you can follow if your MS Windows XP computer is looking dead. All the below steps need to be followed in a proper order:

• Check out your system hardware. Verify that the power cables are properly connected, CPU ventilator is functioning properly, and the hard drive is spinning up. Hard drive is one of the most sensitive components of your computer system, which may fail over time due to various reasons like power outages and accidental drop down.
• Check whether your system displays the BIOS (Basic Input/Output Systems) screen. If you can not see anything, check monitor cable to make sure it is attached properly.
• Check that the MS Windows XP boot window is displayed. If it is not displayed and you encounter some error message, the problem may with system boot sector. You have to repair Windows XP bootloader or MBR (Master Boot Record).
• Revert the changes if you have recently installed a hardware or software, or made any changes to BIOS.
• If Windows XP is booting, but it crashes over time, the problem may be due to a damaged system file. Copy the affected file from Windows XP boot CD and reboot your system.

If none of the above helps you to fix the problem, file system or any other system metadata structure corruption may be the cause of this problem. In such cases, you need to format the hard drive and reinstall operating system. Though, formatting helps you to fix most of the hard drive related problems, but it also removes all data from hard drive and need Windows Data Recovery to be sorted out.

Windows Recovery is possible with the help of powerful third-party tools, known as windows data recovery software. The applications methodically scan the entire Windows hard drive and extract all lost data from it. With read-only behavior and simple graphical user interface, the tools are safe and easy to use.

As you use your Windows computer, you create and delete files very frequently. Deleting any file means to remove it from your Windows hard drive that you think that is destroyed forever. Generally you remove the file, which is not useful. But, in some situations, this is required to ‘undo’ results of removing  a file. The accidental deletions may happen more frequently than you imagine. In such cases, Windows Data Recovery is required, if you do not have complete backup in place.

One of the major advantages of FAT file system is that simplicity that it enables for the files to be retrieved, due to the way in which it removes file. Contrary to what several users believe, removing any file doesn’t actually result into the contents of file being deleted from your hard drive. Instead, Windows places hex byte code “E5h” in first letter of file name. It is a specific tag, which tells the operating system “this file is deleted.” The disk space, which was previously used by this file is available to be used by other files, but the space is not cleared.

Over time, the “freed” disk clusters can be reused by new files or even existing files if their size increases. The windows data recovery is only possible until the file is being overwritten. When you create a file, a file system entry of each file is created in file system table. This entry contains a pointer to the memory address where the file is physically stored. Operating system read this entry to locate and access the file. After deletion of file, the file system pointer is removed and thus it become inaccessible.

However, when you remove a file from your Windows hard drive, it is generally possible to retrieve the file. There are several third-party Windows Data Recovery Software that can help to get your precious data back. When you run any tool immediately, it identifies and retrieve lost files in a folder.

If you do not use your computer between the time of file deletion and recovery attempt, more likely you can recover deleted file. But in case if you keep using the system and the hard drive is fairly full, the chances of successful recovery get decreased. The applications Recover Windows data in quick, safe, and easy way.

There are many reasons why the compression is not very popular in Windows these days. One major cause among them is the lack of necessity. The modern hard drives are cheaper and faster than older ones, thus there are less requirements for stretching the hard drive using compression. But perhaps the biggest concern is data safety and reliability. You may lose your precious data from compressed hard drives and need to opt for Windows Data Recovery solutions to get your data back.

You may find a number of problems regarding compatibility on a compressed drive. The biggest issue with applications running on the compressed drives is either reduced performance because of decompression overhead or conventional memory difficulties because of compression driver. Some applications may not work effectively on compressed hard drive volumes as they cannot handle potential delay in the decompressing of the data. The delay may vary depending upon how files are compressed.

There are greater chances of catastrophic data loss while using compressed volumes than the uncompressed Windows hard drive volumes. Such cases need Windows Recovery to extract lost data. The cause of this problem is that there is an additional layer of the software interpretation, and an additional layer of the disk structures, which may probably get damaged.

Your whole compressed hard drive volume is stored in single file, the CVF. If the file is accidentally deleted or it gets damaged due to any reasons, you may lose all the files on compressed volume. Due to  increased possibility of data loss caused by compression, you should follow the below guidelines:

• Do not compress boot drive- Boot drive contains operating system and all of the critical data structures, so you should not compress it.
• Do not compress data- You should compress the items, which can be recreated in case of loss like installed applications. You can compress applications but should not compress data.
• Scan the disk regularly- Always scan your hard drive to errors. You can use same tools to scan the disk, which are used on regular disks.

In case if you come across data loss situations, Windows Data Recovery Software helps you to recover windows data back. The applications are particularly designed to methodically scan the affected drives and extract all lost data from them. The Windows Recovery utilities are completely safe and easy to use.

Stellar Phoenix Windows Data Recovery Software is the most effective tool to recover lost data from compressed Windows hard drives. It works well with Windows 7, Vista, 2003, XP, and 2000. The software recovers data from FAT16, FAT32, VFAT, NTFS, and NTFS5 file system partitions.

The MFT or Master File Table is the most significant data structure of NTFS (New Technology File System). The MFT stores metadata about each file, folder, and metafile on the NTFS file system partition. The structure of MFT supports special algorithms that help minimizing hard drive fragmentation. However, if the number of entries exceeds 4 million, the MFT may get damaged and you come across catastrophic data loss situations. In order to retrieve lost data in such cases, Windows Data Recovery is required to get your valuable data back.

In a practical scenario, when you delete or create files on the NTFS file system partition that already stores over 4 million files, you may encounter file corruption or file system damage. This behavior might be shown in any of the below given ways:

• Removed files are not removed from the drive. They continue to be shown on same location.
• Files and directories that you haven’t removed can not be accessed any more.
• You encounter a pop-up messages, which states that the hard drive or its data structures are damaged and you need to run Chkdsk to fix the problem.

After this behavior of Microsoft Windows, some of your significant files or directories may not be accessed and you come across data loss. In order to extract lost data, you need to find out the cause of this problem and perform Windows Recovery by sorting it out.

Grounds of the issue:

This issue takes place if the size of MFT exceeds its 4 GB size limit that may happen if you store over 4 million files on your Windows hard drive. When you remove any file whose master file table entry is beyond 4 GB point in such circumstances, an error in the calculations results into the incorrect entry to be pointed as available. If the same entry contains information about other files, and you add new files to partition just after deleting the files, entry can be re-used resulting into the file referenced to be lost.

In order to retrieve lost files from Windows hard drive, you need to use windows data recovery software to extract lost data.  The Windows Recovery tools methodically scan the affected drive using high-end scanning techniques and extract all lost data from it. With non-destructive conduct and rich graphical user interface, the applications are completely safe and easy to use.

You may come across a number of errors on one or more of the hard drive partitions in Microsoft Windows-based computer, while performing routine checkup of the file system. Such errors are generally related to the file system corruption, cross-linked files, and lost clusters. If your Windows hard drive volume is compressed, you may also encounter corruption errors. Such behavior of Microsoft Windows system renders all your mission critical data inaccessible and leads to critical data loss problems. In order to retrieve lost data in such circumstances, you are required to opt for Windows Data Recovery solutions through reliable tools.

The hard drive itself may work properly though a huge amount of files may be damaged. If the hard drive is too damaged to be used or the hard drive contents seems scrambled, the internal structure of the hard drive is damaged. In all such cases, data loss problems are very common and cause significant problems. In order to get your precious data back, you need to find out the cause of this problem and recover windows data Recovery by sorting it out.

Cause of the issue:

This behavior of Microsoft Windows can take place due to various file system issues, which are very common in most of the computers. Such problems depend upon the type of operating system and the applications you are using. Specifically, the lost clusters are very frequent because every time when any application crashes or a power outage occurs, the file can not complete appropriately and thus it shows up as lost clusters.

However, encountering huge amount of lost disk clusters even if you regularly scan the drive, or repeatedly facing issues such as invalid files or directories or the cross-linked files, may be the signal of quite serious issue.

You may also encounter the file system problems due to virus infection. Viruses may corrupt the file system and other data structures. In order to sort out such problems, you are required to format the hard drive and reinstall operating system. But this behavior removes all data from the hard drive and cause critical data loss.

In such circumstances, Windows Data Recovery Software come for your rescue. These are easy to use and advanced applications, which allow you to have quick windows data recovery on your own. With read-only and non-destructive conduct, the applications are completely safe to use.